Analisis Performance Central Prosessing Unit (CPU) Realtime Menggunakan Metode Benchmarking
DOI:
https://doi.org/10.30812/matrik.v20i2.1142Keywords:
Analisis, Hardware, CPU, Benchmark, RealtimeAbstract
Perkembangan teknologi semakin berkembang cepat baik dari performa, grafik, bandwidth dan lain-lainnya sehingga mempengaruhi berbagai sendi kehidupan dan profesi, hal ini menyebabkan perubahan sistem pada piranti atau kinerja pada central prosessing unit. Pada dunia bisnis, saat ini telah memfaatkan kemajuan teknologi informasi demi kelancaran kerja dibidang yang digeluti baik sekala kecil maupun sekala besar. Metode yang digunakan benchmarking merupakan suatu proses mengidetifikasi terhadap hardware dan proses suatu tolak ukur sebuah performa yang diharapkan. Adapun langkah pengujian melakukan evalusi kinerja central prosessing unit (CPU) yang dilakukan pada kinerja hardware atau perangkat keras baik prosessor, ram, vega dan lain sebagainya. Hasil pengujian yang dilaksanakan pada cental prosessing unit (CPU) penggunaan ram oleh prosessor i3 sebesar 3.1 Gb, GPU 3%, Disk uses 1%, penggunaan network atau jaringan 7.7 Mbps, penggunaan power suplay very low. Prosessor i5 sebesar 4.2 Gb, GPU 0%, Disk uses 0%, penggunaan network atau jaringan 7.7 Mbps, penggunaan power suplay low. Prosessor i7 sebesar 2.5 Gb, GPU 9%, Disk uses 9%, penggunaan network atau jaringan 104 Kbps, penggunaan power suplay high.
Downloads
Download data is not yet available.
References
[1] S. Sunter and P. Sarson, “A / MS Benchmark Circuits for Comparing Fault Simulation , DFT , and Test Generation Methods,†IEEE Internasional Test Confrence. Vol. 1 , No. 2 , PP. 1- 7 2017.
[2] P. Kotsampopoulos, Dimitris Lagos, H. Nikos, M. Omar Faruque, L. Georg, N. Onyi, F. Paul, S. Michael, F. Ponci, A. Monti, V. Dinacahi, Kai Strunz. “A Benchmark System for Hardware-in-the-Loop Testing of Distributed Energy Resources,†IEEE Power Energy Technol. Syst. J., Vol. 5, No. 3, PP. 94-103, 2018.
[3] Blesson Varghese, Ozgur Akgun, Ian Miguel, Long Thai and Adam Barker.â€Cloud Benchmarking For Maximising Performance of Scientific Applications" IEEE Transactions on Cloud Computing. Vol. 7, No. 1, PP. 1-14, 2016.
[4] Konstantinos Chasapis, Jean- Yves Vet, Jean- Thomas Acquaviva. “Benchmarking Parallel File System Sensitiveness to I/O Patterns" IEEE Internasional Symposium on Modeling, Analysis and Simulation of Computer and Telecomunication System. Vol. 27. No. 1, PP. 427 - 428, 2019.
[5] Andrew S. Morgan, kaiyu Hang, Walter G. Bircher, Fadi M. Alladkain, Abhinav, Gandhi, Berk Calli, Aaron M. Dollar.“Benchmarking Cluttered Robot pick- and- Place Manipulation With the Box and Blocks Test ,†IEEE Robotics and Automation Letters Vol. 5, No. 2, PP. 1–8, 2020.
[6] S. Sidhanta, S. Mukhopadhyay, and W. Golab, “Dyn-YCSB : Benchmarking Adaptive Frameworks,†2019 IEEE World Congr. Serv., Vol. 2642–939X, PP. 392–393, 2019.
[7] Beau Potre, Brett R. Cowan, Edward DiBella, Sancgeetha Kulaseharan, Devavrat Likhite, Nils Noorman, Lennart Tautz, Nicholas Tustison, gert Wollny, Alistair A. Young, Avan Suinesiaputra. “An Open Benchmark Challenge for Motion Correction of myocardial Perfusion MRI,†IEEE. Vol. 21, No. 5, PP. 1–12, 2017.
[8] Rui Han, Lizy Kurian John, Jianfeng Zhan. “Benchmarking Big Data System: A Review†IEEE Transaction on Services Computing. Vol. 11, No. 3 , PP. 1-18, 2018.
[9] Peter Eckert, Auke J. Ijspeert “Benchmarking Agility For Multilegged Terrestrial Robots,â€IEEE Transactions On Robotics. Vol. 35, No. 2 , PP. 1-7, 2019.
[10] Sebastian Gallenm¨uller, Stephan G¨unther , Maurice Leclaire , Samuele Zoppi , Fabio Molinari Richard Sch¨offauer , Wolfgang Kellerer, Georg Carle “Benchmarking Networked Control Systems,†IEEE Workshop on Benchmarking Cyber-Physical Networks and Systems. Vol. 1 , No. 2 , PP.7-12, 2018.
[11] Xuheng Duan, Haochen Pan, Lewis Tseng, Yingjian Wu..†BBB : Make Benchmarking Blockchains Configurable and Extensible" IEEE Pacific rim Internasional Symposium on Dependable Computing.Vol. 24 , No.1 , PP. 61 - 62, 2019.
[12] Raquel Almeida, Henrique Madeira “Evolving from Dependability to Resilience Benchmarks : Issues and Possibilities,â€IEEE Latin-American Symposium on Dependable Computing. Vol. 7 , No. 1 ,PP. 127–130, 2016.
[13] P. Studi, T. Elektro, F. Teknik, and U. Muhammadiyah, “Analisis Kinerja Prosesor terhadap Proses Overclocking dan Downclocking,†Vol. 1, No. 1, PP. 7–12, 2019.
[14] A. Karki, C. P. Keshava, and S. M. Shivakumar, “Tango : A Deep Neural Network Benchmark Suite for Various Accelerators,â€IEEE Int. Symp. Perform. Anal. Syst. Software.,Vol. , No. , PP. 137–138, 2019.
[15] Lin Li, Alfredo Alan Flores Saldivar, Yun Bai, Yi Chen, Qunfeng Liu, Yun Li “Benchmarks for Evaluating Optimization Algorithms and Benchmarking MATLAB Derivative-Free Optimizers for Practitioners ’ Rapid Access,†IEEE Access, Vol. 7,No. PP. 79657–79670, 2019.
[2] P. Kotsampopoulos, Dimitris Lagos, H. Nikos, M. Omar Faruque, L. Georg, N. Onyi, F. Paul, S. Michael, F. Ponci, A. Monti, V. Dinacahi, Kai Strunz. “A Benchmark System for Hardware-in-the-Loop Testing of Distributed Energy Resources,†IEEE Power Energy Technol. Syst. J., Vol. 5, No. 3, PP. 94-103, 2018.
[3] Blesson Varghese, Ozgur Akgun, Ian Miguel, Long Thai and Adam Barker.â€Cloud Benchmarking For Maximising Performance of Scientific Applications" IEEE Transactions on Cloud Computing. Vol. 7, No. 1, PP. 1-14, 2016.
[4] Konstantinos Chasapis, Jean- Yves Vet, Jean- Thomas Acquaviva. “Benchmarking Parallel File System Sensitiveness to I/O Patterns" IEEE Internasional Symposium on Modeling, Analysis and Simulation of Computer and Telecomunication System. Vol. 27. No. 1, PP. 427 - 428, 2019.
[5] Andrew S. Morgan, kaiyu Hang, Walter G. Bircher, Fadi M. Alladkain, Abhinav, Gandhi, Berk Calli, Aaron M. Dollar.“Benchmarking Cluttered Robot pick- and- Place Manipulation With the Box and Blocks Test ,†IEEE Robotics and Automation Letters Vol. 5, No. 2, PP. 1–8, 2020.
[6] S. Sidhanta, S. Mukhopadhyay, and W. Golab, “Dyn-YCSB : Benchmarking Adaptive Frameworks,†2019 IEEE World Congr. Serv., Vol. 2642–939X, PP. 392–393, 2019.
[7] Beau Potre, Brett R. Cowan, Edward DiBella, Sancgeetha Kulaseharan, Devavrat Likhite, Nils Noorman, Lennart Tautz, Nicholas Tustison, gert Wollny, Alistair A. Young, Avan Suinesiaputra. “An Open Benchmark Challenge for Motion Correction of myocardial Perfusion MRI,†IEEE. Vol. 21, No. 5, PP. 1–12, 2017.
[8] Rui Han, Lizy Kurian John, Jianfeng Zhan. “Benchmarking Big Data System: A Review†IEEE Transaction on Services Computing. Vol. 11, No. 3 , PP. 1-18, 2018.
[9] Peter Eckert, Auke J. Ijspeert “Benchmarking Agility For Multilegged Terrestrial Robots,â€IEEE Transactions On Robotics. Vol. 35, No. 2 , PP. 1-7, 2019.
[10] Sebastian Gallenm¨uller, Stephan G¨unther , Maurice Leclaire , Samuele Zoppi , Fabio Molinari Richard Sch¨offauer , Wolfgang Kellerer, Georg Carle “Benchmarking Networked Control Systems,†IEEE Workshop on Benchmarking Cyber-Physical Networks and Systems. Vol. 1 , No. 2 , PP.7-12, 2018.
[11] Xuheng Duan, Haochen Pan, Lewis Tseng, Yingjian Wu..†BBB : Make Benchmarking Blockchains Configurable and Extensible" IEEE Pacific rim Internasional Symposium on Dependable Computing.Vol. 24 , No.1 , PP. 61 - 62, 2019.
[12] Raquel Almeida, Henrique Madeira “Evolving from Dependability to Resilience Benchmarks : Issues and Possibilities,â€IEEE Latin-American Symposium on Dependable Computing. Vol. 7 , No. 1 ,PP. 127–130, 2016.
[13] P. Studi, T. Elektro, F. Teknik, and U. Muhammadiyah, “Analisis Kinerja Prosesor terhadap Proses Overclocking dan Downclocking,†Vol. 1, No. 1, PP. 7–12, 2019.
[14] A. Karki, C. P. Keshava, and S. M. Shivakumar, “Tango : A Deep Neural Network Benchmark Suite for Various Accelerators,â€IEEE Int. Symp. Perform. Anal. Syst. Software.,Vol. , No. , PP. 137–138, 2019.
[15] Lin Li, Alfredo Alan Flores Saldivar, Yun Bai, Yi Chen, Qunfeng Liu, Yun Li “Benchmarks for Evaluating Optimization Algorithms and Benchmarking MATLAB Derivative-Free Optimizers for Practitioners ’ Rapid Access,†IEEE Access, Vol. 7,No. PP. 79657–79670, 2019.
Downloads
Published
2021-05-29
Issue
Section
Articles
How to Cite
[1]
Y. W, A. Fauzan, A. Yani, and M. A. Aziz, “Analisis Performance Central Prosessing Unit (CPU) Realtime Menggunakan Metode Benchmarking”, MATRIK, vol. 20, no. 2, pp. 237–248, May 2021, doi: 10.30812/matrik.v20i2.1142.
Similar Articles
- Surahmat Surahmat, Alfred Tenggono, Analisis Perbandingan Kinerja Layanan Infrastructure As A Service Cloud Computing Pada Proxmox dan Xenserver , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 19 No. 1 (2019)
- Ahmad Naufal Labiib Nabhaan, Rakandhiya Daanii Rachmanto, Arief Setyanto, Characterizing Hardware Utilization on Edge Devices when Inferring Compressed Deep Learning Models , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 24 No. 1 (2024)
- Deni Marta, M. Angga Eka Putra, Guntoro Barovih, Analisis Perbandingan Performa Virtualisasi Server Sebagai Basis Layanan Infrastructure As A Service Pada Jaringan Cloud , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 19 No. 1 (2019)
- Jian Budiarto, Jihadil Qudsi, Deteksi Citra Kendaraan Berbasis Web Menggunakan Javascript Framework Library , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 18 No. 1 (2018)
- Safrian Aswati, M. Sabir Ramadhan, Ada Udi Firmansyah, Khairil Anwar, STUDI ANALISIS MODEL RAPID APPLICATION DEVELOPMENT DALAM PENGEMBANGAN SISTEM INFORMASI , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 16 No. 2 (2017)
- Ahmat Adil, Perancangan Spasial Pengembangan Potensi Produk Kerajinan berbasis Pemukiman di Taman Nasional Komodo , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 18 No. 1 (2018)
- Angelina Ervina Jeanette Egeten, Nila S Rahayu, M. Ismail B.S Sobron, Handal Abdillah, ANALISIS DAN PERANCANGAN SISTEM INFORMASI TENDER AREA KOMERSIAL PADA PT. ANGKASA PURA I (PERSERO) STUDI KASUS BANDARA SEPINGGAN BALIKAPAN , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 17 No. 1 (2017)
- Dinan Yulianto, Taufiq Ismail, Analisis Website Program Kreativitas Mahasiswa (PKM Center) Universitas Ahmad Dahlan Menggunakan WebQual 4.0 , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 20 No. 2 (2021)
- Ismarmiaty Ismarmiaty, Adam Bachtiar, ANALISIS PENGARUH VARIABEL MODEL UTAUT TERHADAP PENERIMAAN DAN PENGGUNAAN APLIKASI BADAN PENYELENGGARA JAMINAN SOSIAL (BPJS) KESEHATAN DI KOTA MATARAM , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 17 No. 1 (2017)
- Toni Anwar, Jeffri Prayitno Bangkit, Andri Laksono, Sistem Informasi Geografis Pemanfaatan Aset Tanah Daerah Di Dinas Perumahan Dan Pemukiman Kabupaten Purbalingga , MATRIK : Jurnal Manajemen, Teknik Informatika dan Rekayasa Komputer: Vol. 19 No. 2 (2020)
1-10 of 54
Next
You may also start an advanced similarity search for this article.
.png)
