Shoe Dryer Using Fuzzy Logic Controller with Internet of Things-Based Monitoring

Aqsal Renaldi Permata Dewata; Parama Diptya Widayaka; Puput Wanarti Rusimamto; Farid Baskoro

doi:10.30812/bite.v6i1.4056

Aqsal Renaldi Permata Dewata Universitas Negeri Surabaya
Parama Diptya Widayaka Universitas Negeri Surabaya
Puput Wanarti Rusimamto Universitas Negeri Surabaya
Farid Baskoro Universitas Negeri Surabaya

DOI: https://doi.org/10.30812/bite.v6i1.4056

Keywords: Shoes, IoT, Dryer, Rain, Fuzzy

Abstract

Background: When the rainy season arrives, the main problem faced is the drying process of shoes due to uncertain weather. Moreover, drying the shoes directly under the sun can reduce the glue's durability and damage the shoes' material.
Objective: This research aims to create an automatic shoe dryer that can be monitored online and uses fuzzy logic to maintain a stable temperature to maintain shoe durability.
Methods: This research uses the fuzzy Mamdani method with ESP32 as a microcontroller to regulate the temperature stability of the shoe drying box.
Results: Sneaker shoes were found to dry at 52% humidity and stable temperature at ± 410C within 82 minutes. Meanwhile, leather shoes dried at 62.9% humidity, and the temperature stabilized at ±350C within 20 minutes.
Conclusion: The application of Mamdani fuzzy logic has an effect in stabilizing the temperature; if the drying box is tested without using a controller, the temperature will continue to increase, and the humidity will drop quickly, resulting in shoes not being completely dry.

References

[1] M. A. Ramadhan, Muhammad Reski, “Rancang Bangun Box Pengering Sepatu Berbasis Mikrokontroler,” J. Rekayasa dan Teknol. Elektro, vol. 17, no. 3, pp. 292–297, 2023.
[2] H. R. I. Rahmawan, “Perancangan Kotak Pengering Sepatu Otomatis Menggunakan Positive Temperature Coefficient Heater Berbasis Mikrokontroler dengan Notifikasi Telegram,” 2023.
[3] Nurhidayah A, “Identifikasi Jamur Patogen Penyebab Dermatofitosis,” Progr. Stud. Teknol. Lab. Med. Fak. Ilmu Keperawatan dan Kesehatan, Univ. Muhammadiyah Purwokerto, vol. 5, pp. 8–17, 2021.
[4] Yunus, A. P. Widhikdho, A. H. Ramadhani, and B. Anshari, “Automatic shoe drying oven integrated with Raspberry Pi Cloud system for advanced footwear industry,” E3S Web Conf., vol. 450, 2023, doi: 10.1051/e3sconf/202345002009.
[5] A. Rahayuningtyas, D. Sagita, and N. D. Susanti, “Automation and monitoring system of drying parameters in cabinet dryer using Arduino (temperature and humidity),” in AIP Conference Proceedings, 2023, vol. 2674, no. 1.
[6] Z. I. Awwal, A. Murtono, and S. Adhisuwignjo, “Implementasi Kontrol PID untuk Pengaturan Suhu dan Kelembaban Pada Lemari Pengering Pakaian,” Kohesi J. Sains dan Teknol., vol. 2, no. 9, pp. 16–26, 2024.
[7] M. R. Ramdan, T. Akbar, H. M. Putra, and P. Terkait, “Sistem Monitoring Pengering Sepatu Otomatis Berbasis Internet of Things (IoT),” J. Pengemb. Rekayasa Inform. dan Komput., vol. 1, no. 1, pp. 43–52, 2023.
[8] O. A. Putra, H. Andrianof, and A. P. Gusman, “The Design Of The Dryer Shoes Automatic Based On Moisture Uses The Method PID,” Int. J. Dyn. Eng. Sci., vol. 7, no. 2, pp. 140–145, 2022.
[9] Tiya Adita Oktavia, “Rancang Bangun Alat Pengering Pakaian Menggunakan Metode Fuzzy Logic,” Electrician, vol. 16, no. 3, pp. 332–337, 2022, doi: 10.23960/elc.v16n3.2385.
[10] Y. Atif, K. Al-Falahi, T. Wangchuk, and B. Lindström, “A fuzzy logic approach to influence maximization in social networks,” J. Ambient Intell. Humaniz. Comput., vol. 11, no. 6, pp. 2435–2451, 2020, doi: 10.1007/s12652-019-01286-2.
[11] A. S. Dinata and U. P. Rahayu, “Rancang Bangun Alat Penetas Telur Otomatis Berbasis Arduino Uno,” J. Ilm. Mhs. Kendali dan List., vol. 2, no. 2, pp. 66–74, 2021, [Online]. Available: https://doi.org/10.33365/jimel.v1i1.
[12] I. S. Mangkunegara, A. S. S. Ariyanto, and D. N. Triwibowo, “Implementasi Arduino Iot Cloud : Potensiometer Sebagai Pengatur Intensitas Cahaya LED,” Sci. Appl. Informatics, vol. 7, no. 1, pp. 65–72, 2024.
[13] R. D. Ramanda, A. Sofwan, and M. Arfan, “Perancangan Aplikasi Antarmuka Smart Greenhouse Berbasis Internet of Things (Iot) Pada Perangkat Bergerak Android,” Transient J. Ilm. Tek. Elektro, vol. 9, no. 1, pp. 56–66, 2020, doi: 10.14710/transient.v9i1.56-66.
[14] M. M. F. Fatori, “Aplikasi IoT Pada Sistem Kontrol dan Monitoring Tanaman Hidroponik,” J. Pendidik. Sains dan Komput., vol. 2, no. 02, pp. 350–356, 2022, doi: 10.47709/jpsk.v2i02.1746.
[15] N. Harefa and M. Marbun, “Implementasi Logika Fuzzy Mamdani Untuk Mengidentifikasi Tingkat Kecanduan Pelajar Terhadap Game Online,” JOISIE J. Inf. Syst. Informatics Eng., vol. 4, no. Desember, pp. 128–138, 2020.